Gowercroft is committed to the R3 policy of environmental sustainability. Reducing our usage, Reusing wherever possible and Recycling everything else.
Here is a breakdown of how we achieve this
are designed to achieve very high standards on energy efficiency and draught-proofing to reduce energy usage throughout their lifespans. We exclusively use water-based paints and finishes. These coatings do not release volatile organic compounds (VOCs), which are toxic to the environment and can be carcinogenic to humans and animals. Water-based paints are safe for disposal and have a long shelf life.
painted with water-based paints are safe to burn in domestic applications at the end of their service life – so our
will never end up in the landfill.
All of our standard
are made from fast-growing, long lasting timber from plantations in the developed world. These trees take about 25 years to reach full maturity, but will last upwards of 50 years in application – being a net Carbon sink. If we are required to use tropical hardwoods, then all of these timbers will come from managed plantations independently-verified under European regulations for sustainability. The majority of our timber is ordered based on component sizes, so we have very minimal waste material in the thickness and width.
Our timber off-cuts are incinerated in our on-site Biomass heater, with the heat generated used to warm the factory and ensure an ambient drying temperature in the paint shop.
All shavings are taken by a local farm and are used for bedding animals. This mixture is then used to mulch around the farm.
brought back from sites across the U.K. are fully disassembled; with glass and
recycled and the timber put through the Biomass burner (where the paint system allows). All uPVC and Aluminium frames are taken away for recycling.
Our 16,000 square foot workshop produces less than 5,000 kilograms of landfill each year. (The domestic average per person, per year is just over 600 kilograms.)